Net54baseball.com Forums

Net54baseball.com Forums (http://www.net54baseball.com/index.php)
-   Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions (http://www.net54baseball.com/forumdisplay.php?f=2)
-   -   E145 1914 Cracker Jack sizing (http://www.net54baseball.com/showthread.php?t=80745)

Archive 04-10-2006 01:44 PM

E145 1914 Cracker Jack sizing
 
Posted By: <b>Sal</b><p>Could some of you let me know if it's not out of the ordinary for the E145 1914 CrackerJack series cards to be 1/16th of an inch shorter either top to bottom or side to side other than the 2-1/4"x3" size some literature states they are.<br />I have some that look good (unaltered), even under magnification but are 1/16th short or just slightly less than that from either top to bottom or side to side. <br />None exceed the 1/16th in shortness.<br />Seems to me from what I can tell, the sizes can vary just a smidge. <br />Any help would be deeply appreciated.<br /><br /> Sal<br />

Archive 04-10-2006 02:21 PM

E145 1914 Cracker Jack sizing
 
Posted By: <b>John S</b><p>I actually had a couple 14's sitting on the computer desk. Both are dead on 2 1/4" by 3". Obviously that does not mean that the examples that you have are trimmed.

Archive 04-10-2006 02:26 PM

E145 1914 Cracker Jack sizing
 
Posted By: <b>Scott Mosley</b><p>Hi Sal,<br /><br />I had a partial 1914 set graded by SGC a couple of months back and had three returned as undersized which I subsequently had SGC put into AUT holders.<br /><br />The cards have been in my collection for over 30 years and were obtained from the original collector so they were not trimmed or altered.<br /><br />Here is an example... <a href="http://www.sgccardregistry.com/images.asp?cardid=10228&usetid=1668" target="_new" rel="nofollow">http://www.sgccardregistry.com/images.asp?cardid=10228&usetid=1668</a><br /><br />Scott<br /><br />Edited to add that I measured the three that were returned and they were, if anything, just a smidge over 1/16th of an inch off.

Archive 04-10-2006 04:28 PM

E145 1914 Cracker Jack sizing
 
Posted By: <b>Sal</b><p>So, in this boards opinion, would SGC possibly grade an E145 1914 CJ card that's 1/16th or less short from top to bottom and side to side???<br />Im sure there's some tolerance to this issue with them????<br />Not every E145 is the same size. T206's have the same problem, and you see different variations in size with them all the time.<br /><br /> Sal<br />

Archive 04-11-2006 03:36 AM

E145 1914 Cracker Jack sizing
 
Posted By: <b>Spencer</b><p>Hello Sal,<br /> I have been getting my CJ's holdered with PSA, and some cards are definitely larger than others. I will have to measure a large one and a small one and see what the difference is. You can always send them in, see what happens, and if not satisfied, break them out of the holders and resubmit and see if anything different happens. Good luck!


All times are GMT -6. The time now is 06:37 AM.