[QUOTE=jchcollins;1478092]I don't have the screws too tight on it, but good point just the same. Most of my other pre-57 cards that are not graded are in Card Saver I's...
My experience over 25+ years is that if the screws are only tightened finger tight, you will almost never have a problem insofar as damaging the card is concerned, and the card won't fall out. Screwdowns, especially 1/2 inch lucites, were how we did it prior to TPG slabbing--they are very protective. I say "almost never" because my one exception just happened to be a '62 Maris in NrMt-Mt. The inner holder surface was uneven, leaving a slight wrinkle in the card's surface. I spooned that out as best I could, but it still got downgraded to a "7" by PSA due to that flaw.
Happy collecting,
Larry
|