Looking for opinions and creative help

[veleno45]

As my collection grows I have had problems figuring out how to store my graded cards in a way that is acceptable to me, and more importantly, my wife. I was advised that plastic protectors, cardboard boxes, sleeves, etc are no longer acceptable on the dining room table. Since I have not been able to find any real quality that is out there, and haven't seen any good suggestions here, I reached out to my Amish friends to build a better cabinet/flat file specifically for my graded cards that will blend with the furniture in my house. Here is where I need your creative opinions and your knowledge. I thank everyone who answers my questions. Your help is appreciated.

1) I only own PSA graded cards right now so I lack slab knowledge. Are all the major grading companies slabs exactly the same size and weights?

2) Do all the cards need to be upright, or would you rather have them on their back, flat? Is on their side ok? Consider access to the cards also please.

3) Do the drawers need to be felt or fabric lined, or is straight wood ok?

4) How many cards would you expect a single piece of furniture to hold to be effective? Keep in mind this is really for personal collection, not dealer storage and such.

5) If you were custom building this what would you like to see on this piece that I am missing or haven't thought about?

Thanks!

[John V]

Here's an idea. These antiques come in various sizes and prices and seem to be plentiful. The big one might even pass as a piece of furniture by your decorator.

[Section103]

Lots of great questions -

1) The slabs of PSA, SGC and Beckett are NOT the same size. They are generally pretty close in length and width, so storage for one generally fits storage for all, but if the holder has very little room, you will eventually run into trouble. Beckett is quite a bit thicker than the others, meaning you need more storage room.

2) Personal choice, but I bet most collectors like to see their cards "just so". I think they are much easier to access when they are all in one direction, upright, and of course, facing forward.

3) So long as the card itself is adequately protected, there's little need for felt or lined drawers. Its a nice touch, but not absolutely necessary. Keep in mind, you'll want to stack your cards so that there isn't tons of shifting room. Stack something (anything) in the rear portions of your unused drawers to minimize any sliding should something unusual occur. Once you do that, there should be minimal damage, if any, to the casings.

4) Completely dependent on your collection. Big enough to allow for growth, not so overwhelmingly large as to be useless wastes of space.

5) Something that polishes itself?

I'll add that I have something similar to what John posted in his second pic and love it. Its furniture and so it sits well within a normal room and it allows me to organize different collections and supplies in numerous ways.

[brewing]

Rich did a good job of answering. I would add to #1. SGC slabs are wider and taller than PSA. I would guess about 1/4 to 3/8" larger width and height.

[conor912]

I would add to make sure anything made to hold slabs is built like a tank, preferably with reinforced drawers and dovetail joints. Slabs en masse are extremely heavy and may bow the wood as the years pass. Last I checked, I believe PSA slabs were about 10 to a pound, with SGC and BVG weighing even more....the stress on the the drawers will eventually take its toll if not considered before building.

[Sean1125]

To help you focus in... How many cards are we actually talking? Storage methods for 50 would be different than 500!!

Sean

[TipTopBread]

If you have any cards of value, I would suggest storage in a lock box at the local bank. Net 54 has had various counts of problems encountered by members of disappearing collections.

[I Only Smoke 4 the Cards]

Originally Posted by TipTopBread

If you have any cards of value, I would suggest storage in a lock box at the local bank. Net 54 has had various counts of problems encountered by members of disappearing collections.

A large fireproof safe can also be purchased for a few thousand dollars.


Sent using Tapatalk

[steve B]

Here's what I did for the graded ones.





The base is solid oak, except for the bottom which is 1/4 Masonite with an oak support under the center.

The top is Oak plywood with solid trim.
The unfinished insert is 1/4 birch or ?Aspen? whatever they carry at Lowes. They have more choices now.

I will for all three companies, with a bit of space to the sides and top of the slabs.

Capacity would of course vary since the slabs are different thicknesses, But for thicker slabs (I just measured a GAI I had on the desk at 1/4 inch) It will hold about 250, a bit more for SGC or PSA, maybe a bit less for Beckett.

The stuff I'd change would be using a different lid support, The one I got is a friction one, and it's loose now. Adjusting means removing the insert, so I haven't done it.
I'd also line the bottom with felt simply to keep the slabs from sliding when the row is mostly empty. That's not really a problem, except if the table gets bumped.

I'm planning on doing something like the photos posted earlier, but sized for toploaders and modular. That will be to replace the shelf and boxes in my hobby room. And to add a load more capacity.

There's a guy who makes wooden boxes pretty reasonably and usually has some in one of the BST sections.


Steve B