Advice needed on what's the best one-screw holder

[brian1961]

Guys, I am asking for some advice on what you believe to be the best one-screw holder on the market. I have some modern cards that I really don't want to put through the expense of grading, so would like to put them in one-screws.

The kind of cards I'm talking about are 52-56 Topps and the 1957-onward standard size. About eight years ago, I began using Pro-Mold. They work fine. Rather than check out their web site to order more, I wanted first to see what any of you used that work great, and would recommend.

Thanks for your time and advice.

---Brian Powell

[JustinD]

I think you are right with the Pro-Mold on the odd sizes as it's the best alternative for those out there.

For any standard size cards I would go to the Ultrapro One-touch. They are just so well made and easy to use. Good weight, UV protection and display quality makes them just the best in my book. Never had a problem with the magnet catch opening either.

I use the Pro-Mold on the odd size, but would switch in a second if Ultrapro started making them.

[jchcollins]

My only problem with Pro Mold in the vintage sizes is that cards (not always) but frequently slide around within the case. I recently bought some for '52-'56 Topps, but the recessed areas are larger than what you will find with PSA cases. Going to try using those cases along w penny sleeves and see if the problem improves.


Sent from my iPad using Tapatalk