![]() |
Quote:
As far as I know & remember... There were very few of us who collected these types 10 + years or so ago(within the Net54 Community anyways). Back then... I had quite a few of them and even had a tuff time selling & trading them. As for the Soul with the creative hand... About 2-4 years ago, Do You remember a lad by the name of Kevin Saucier(I believe that was his name!?) He showed up & claimed that he could remove layers of color... and that he new of some other who had created some of the cards that were in circulation that were gaining attention. He even claimed that PSA had labeled some of them "Missing Color"... I was not a believer then, nor am I now! I do know that these threads should be available iN Archives... Only, I haven't the desire to drum them uP for the sake of side tracking this Wonderful Thread... So I do Hope that You'll forgive me :) Rest assured my dear friend... iN my Most Humble OpinioN ~ Your Mordecai iS the Real Deal! I have No Doubt!!! |
1 Attachment(s)
|
1 Attachment(s)
|
there you go Rob!
1 Attachment(s)
That Starr is super rare and in an elite group of approx. 12 ghost "under print" factory stamps...
get that puppy sgc graded!!! it's an 8 k card at least:)....that one will get a numerical grade.....very nice card:eek: here's my weimer:)...sister card to the starr |
|
Hi Chris you mean Becker? I am taking a ride to Sgc today to get it graded.
|
1 Attachment(s)
Hi Chris here it is I was very happyAttachment 167477
|
Here's a52 ToppsAttachment 167638
|
Rob....
Congrats! 1 year later, and I said "sister " card, but obviously not cut from the same sheet...:)
WHAT a beauty....an elite club.... JAMIE:eek::eek::eek: I'M having scrap OVERLOAD:eek: |
Yes, colors can be removed. Some easier than others. Ghost cards can and have been made this way. Heck, an entire picture (it's fly-wing thin) can be lifted off as well.
In my most humble opinion the Mordecai is still questionable...but it's holdered now. Many on this thread look great. Kevin Saucier |
Kevin.....
are a master;)
|
1 Attachment(s)
Here's another one for you 52 guys Attachment 167666
|
Gotta love those 1952 triple prints!
Cheers, Patrick |
Quote:
I know that you have a following of members who believe that You have this gift... Some even think You've Master'd this fallacy... I'm not saying that You can't remove colors... And imho, that is a complete an utter crime! What I am Saying... is that Your knowledge is, and has been Always Talk. Show us some of Your handy work... :rolleyes: Just to add... I'm not normally this confronting. However... |
1 Attachment(s)
|
1 Attachment(s)
[ATTACH]v[/ATTACH]
|
1 Attachment(s)
|
1 Attachment(s)
|
A Matty ghost back obtained from a board member a few years ago (and a few other random strip cards)...
http://luckeycards.com/pw516varieties9x.jpg |
Quote:
Regarding the card's history, I think we've already established that the e93 has been in a holder for the past 10 years (at least) and it was with Jim B all this time after he bought it in a Lipset Auction. From what people are telling me the artist in question was someone within the past few years? Does anyone have an example of a shaved card they could post? Then we could at least have something to compare the Mordecai to? The silhouette on the Mordecai looks a little too good to be the result of shaving off part of the card but I'll definitely keep an open mind if someone can post something similar. Also, has anything been documented on "card shaving"? This is something I've never heard of so it would be helpful to read up on it.... |
3 Attachment(s)
Brian, I've never heard the term "shaving" in regards to removing colors; always understood that to mean micro-trimming or sanding.
When cards are put through a series of certain chemicals some colors wash away faster than others. The dark green (as seen on Mordecai), browns, and certain blacks hang on longer, while others may fade rather quickly. Why? I don't know. More/less or spot specific ink can be removed depending on the amount of detail desired. Anyways, here are some examples on why I think the Mordecai card is questionable. I made these and dozens of other altered cards years ago. The t206 below had the background with just the image removed but I decided to keep going. To my knowledge, none of my alterations are in the hobby. Kevin Saucier |
Quote:
|
Kevin, thanks for explaining that makes a little more sense now. I had no idea that you could remove color from cards with precision that way. I thought the only real method was soaking, which sort of takes all color away consistantly and with no accuracy.
Leon, the card has been in the same holder since Jim bought it back in 2004. Link is below. I'm not a big fan of sending cards in for grading, have never had an account with SGC or PSA, and probably haven't sent a card in for grading in close to a decade. I guess I could consider it now though since circumstances seem to call for it. http://www.oldjudge.com/archive/2004...ll/graded/176/ A question though, if this is done with chemicals and not by shaving or sanding the color away, how can it be done to match the curves of the card precisely? Mordecai's silhouette seems to be perfectly shaped still. Also for the colors themselves, I figure the brown started with a dark green color pass for the background and then added a layer of yellow to lighten the green to the point where it's the bright green you see normally on the e93 Brown. But if you're removing color with chemicals, how does the chemical seek out only the yellow from the paper but leave the dark green? His sleeves also had the lightest grey out of all the spots where you saw a grey or black but you still see a lot of the light grey remaining, where as areas of darker grey, like the "C" on his chest, are completely gone. Final question, did this ever come up on the board before or discuss it with Jim? Seems like I saw Jim post pictures of this card several times over the years but nobody ever said anything about it before now. |
Leon....
;)been waiting for the young ghost brown om rosetta stone of t206 to appear:)
one of my favorite scrap:D |
Quote:
Yes... these cards are well known(to me anyway). Scraps & Removing Color has always been of interest of mine. 15 or so years ago, Scraps, Misfits, Freaks etc... were a good part of my collection. I'm curious to see, if You have one, or know of one other, an Example of one that would be iN the same order as Jim's "Mordecai Brown". Mostly, Colors can be removed by chemically neutralizing the specific ink color. Removing a combination of a few colors is not possible without damaging the card, also the chemical solvent would then bleed into the other area of the cards color-litho(In this case, outside the players figure). Even carefully removing one color at a time, would be a very lengthy process... and in the end the card itself would show noticeable damage. Removing the Black ink is the hardest![ This is why I am so confident that Jim's Card is "Scrap" and not made after the factory to look this way. Just a little disclosure! I grew up New York and one of my friends, their family owns a major printing company. The Family Business is 3 generation's running. My Friend is a little older than me, I believe that he's 57. In the past 10 or so years we have discussed the possibilities of the ink process and in~depth color removal. He has been very Helpful, Helping me to understand what can and can't be done. And of course, all of this iS, my humble opinion :) Oh... Brian, I do believe that this was brought up involving Jim's Card, But I don't remember Jim being involved in the discussion... When I have a bit more time, I'll see if I can come uP wit the Archives... oR maybe someone else can help us out? |
2 Attachment(s)
Denny, will try my best here. It's not the colors that are missing insomuch as what colors are left; the stubborn dark green and shades of blacks.
It is easier to remove a combination of ink then it is to remove a certain color. In some cases it is not possible to my knowledge. I have been able to remove just the light blue and/or just the flesh tone. It has to be closely watched and checked on by the second. More than one chemical or mixtures are required at times. In all the card stock and remains perfectly intact. If it looks off, a simple re-tone fixes it. Here are some cards made previously that come close. I tend to get carried away and keep the process going without documenting the progress but this will give you an idea. Guess, I could always find a non-sport and make another to match the Brown but it's a process and my interests are elsewhere now. Kevin |
Thanks Kev,
I do believe that we both can see & understand that the "Process" takes its toll oN the Card and the evidence of the "Process" is left behind leaving the Card Damaged... My Belief iS... that if I had your cards iN hand and the Mordecai along side of them I would be able to determine that the Mordecai iS "Real"(w/o any Card Surface/Layer damage). I do follow along as to what Your conveying and I just have the notion that the proof iS & would be iN plain sight... iF the Cards were iN my hands(or yours!), the answer would be easy to determine. At this point... I Still Strongly see the Mordecai to be "True Scrap", as opposed to being "Worked"...To me, It Looks More Real than NoT! I do humbly believe that the latest cards that you scanned, show me enough that I believe that I can tell that they have been "worked". I do understand & respect both Yours & Leon's position/opinion oN the Mordecai Card. However, from what I know... The Dating of the Mordecai Slabbing, & from its scan(although one might say its really hard to see & tell!?), I still believe that its True to the "Scrap" Nature. Thanks fir taking the time to share & discuss the issue. And if I at All offended You iN Any Way... "Please Forgive Me!?" I Sometimes wear my emotions oN my Arm(so to speak), my passion is & remains towards the Hobby... I'm certain that the idea that it was "JimB's Card" that was iN question... & I'm sure that I went further than I should of, my emotions got the best of me! "So I do Hope that You'll Forgive me!?" Sincerely! As Always... |
Weimer Ghost
4 Attachment(s)
Weimer Ghost
Attachment 168824 Attachment 168825 Attachment 168826 Attachment 168827 Available in BST |
Al Simmons ghost
1 Attachment(s)
The ghost of Al Simmons is in a Philadelphia theater.
|
3 Attachment(s)
I thought it would be fun to bump this thread for Halloween.
|
1 Attachment(s)
Here is two-for-one.
Thanks again Mike P. for adding this one to my collection. |
1 Attachment(s)
Cool card Jantz! Who is on the left?
Here's my McLean-Evans: |
1 Attachment(s)
Quote:
Another Net54 member pointed it out to me some time ago when I bought it. There is another Myers ghost that matches up like this. |
1 Attachment(s)
Boo!!!
Here He iS Jantz... |
2 Attachment(s)
Wheat signed ghost.
|
Let's see some spookiness :eek:
|
It isn't pre-war. In fact, it doesn't even exist in meat space. But, a number of years ago, I photoshopped a Creature from the Black Lagoon card, based on the 2004 Fleer Greats of the Game set.
https://1.bp.blogspot.com/-pATPYQ3FR...CFBL_Front.jpghttps://2.bp.blogspot.com/-7e7pmzr0Y.../CFBL_Back.jpg |
2 Attachment(s)
The ghosted T206 Lentz, wearing an E94 McGraw costume.
Brian |
1 Attachment(s)
Not many days more appropriate to post this one than on Halloween!
|
Quote:
Great card by the way!!! |
All times are GMT -6. The time now is 12:17 AM. |