What happened here - "headless" t222 Oldring

[mrvster]

Ichabod OIdring???

[Jobu]

It looks to me like it came into contact with a liquid that erased the ink. It is a top secret process called "gone with the image" that is the result of years of tinkering and perfecting the formula. Seriously though, it looks like there are some texture differences on the top that might suggest liquid.

[steve B]

Looks to me like the image either didn't get enough light, or enough developing fluid. No ink usually involved in photos, and true B+W doesn't usually fade if it's been developed properly.

Steve B

[swarmee]

Originally Posted by steve B

Looks to me like the image either didn't get enough light, or enough developing fluid.

That's what I figured as well. Looks like a photograph that was not fully exposed during the photography process.

[shammus]

Thanks guys, I appreciate the feedback . If it was indeed the photo that didn't get enough ink, exposure, etc... During the photography process, wouldn't other Oldrings have this same issue?

Bryan, that's certainly a solid point as well. However, the texture of the card is actually perfectly smooth. The swirling you see that appears to be texture is actually a crummy plastic toploader that the card is loaded in. There's no change in texture at all throughout the entire card except for that top right corner.

I'll try to post a better scan of the card later on....one of the card outside the top-loader.

Btw....there isn't any way that there could be this much ink loss if someone tried to soak a t222 could there?

[jlehma13]

His head's gone. It's like its been erased. Erased from existance!

[swarmee]

Originally Posted by jlehma13

His head's gone. It's like its been erased. Erased from existance!

We must go back! Back to the Future! (Oct 22, 2015)

[steve B]

There might be others. Since they're photographs I don't know if T222s were done as sheets or individually. There's a few places in the photo process this could have happened, most would be a one time only sort of thing. If they used multiple negatives and one got some light exposure that would also cause the same problem, but it would be odd for it to get all the way into production. If they were done as contact prints- Negative and paper placed under glass and exposed - the effect seen would be almost impossible. If done with an enlarger type apparatus something could have blocked the light during the exposure. Or for any, the tray of developer could have been low and/or the paper curled causing a section to not get developed. I think that's the most likely since it's done on the dark and whoever was doing it was probably doing a bunch of them so they'd have had multiple cards/sheets in different developing trays and could have missed a mistake like this.

Steve B

Originally Posted by shammus

Thanks guys, I appreciate the feedback . If it was indeed the photo that didn't get enough ink, exposure, etc... During the photography process, wouldn't other Oldrings have this same issue?

Bryan, that's certainly a solid point as well. However, the texture of the card is actually perfectly smooth. The swirling you see that appears to be texture is actually a crummy plastic toploader that the card is loaded in. There's no change in texture at all throughout the entire card except for that top right corner.

I'll try to post a better scan of the card later on....one of the card outside the top-loader.

Btw....there isn't any way that there could be this much ink loss if someone tried to soak a t222 could there?

[Leon]

My first thought was chemicals. But poor developing is possible too.

[Joshchisox08]

Originally Posted by mrvster

Ichabod OIdring???

Ahhh MRVSTER, I'm not sure the group is ready for the tale of the Headless Oldring.