T3 Pages?

[conor912]

T3s absolutely fit in 6x9 toploaders. They make 3 hole pages for comics that fit the 6x9s decently well....better than an 8x10 anyway. But if you want a tighter more custom look, you get an impulse sealer for $30 on amazon and make your own custom pages with whatever size pockets you want.

[Hot Springs Bathers]

Great info gentleman thank you.

[yomass]

Vario pages are perfect and there are binders made specifically for them.
check out ihobb.com

[Leon]

But I always feel I will damage a large card's corners or edges putting it in a big holder.

Originally Posted by conor912

T3s absolutely fit in 6x9 toploaders. They make 3 hole pages for comics that fit the 6x9s decently well....better than an 8x10 anyway. But if you want a tighter more custom look, you get an impulse sealer for $30 on amazon and make your own custom pages with whatever size pockets you want.

[conor912]

Originally Posted by Leon

But I always feel I will damage a large card's corners or edges putting it in a big holder.

Hmm. Mine are in 2 mil Mylar then in 6x9 top loaders. Snug as a bug. One of the reasons I like Mylar over poly is that it grips the top loader better. Anything short of frisbeeing it across the room and I’m not worried one bit.

[Exhibitman]

BCEMylar.com item catalog #66B was perfect; they are out of stock right now. I also use a mylar sleeve inside an Ultra Pro comic book page, which is pretty good.

[JLange]

I also use 8x10 top loaders and then put them In a 8-1/2 x 11 document protector page from an office supply store. These work great and the 8x10s are snug and hold the card well at the depth you put it at in the holder. Only tricky part at all is the initial input of the card which is easily handled with due care. This approach lets me mix and match these pages with 9 pocket and 4 pocket pages in the same album.