New Grading Company - CSG

[perezfan]

Originally Posted by chadeast

You're welcome. I display my cards too. The holders matter to me, very much. And yes, I have a current preference

EDIT: Note that any slab even an 1/8" taller than an SGC slab will not fit in my display case.

Beautiful display.

That's exactly what I meant to convey about clean aesthetics and a slab that emphasizes the card above the slab. Awesome Goudeys and classy looking display!

[chadeast]

Originally Posted by perezfan

Beautiful display.

That's exactly what I meant to convey about clean aesthetics and a slab that emphasizes the card above the slab. Awesome Goudeys and classy looking display!

You're welcome again! OK, I had to put in a little more time for you Tobacco types, but I'm glad I did because the third image below is my favorite. It's similar to SGC but better, IMHO. I like how the black background not only does its wonders for the card, but makes the label really pop. If we could get rid of the green and go B&W on the label, I'd be even happier, but that is probably a bridge too far. Companies tend to get very particular about branding. Very generous grading on this Coupon! Feedback welcome.

EDIT: Scale should now be accurate.

[Casey2296]

Originally Posted by chadeast

You're welcome again! OK, I had to put in a little more time for you Tobacco types, but I'm glad I did because the third image below is my favorite. It's similar to SGC but better, IMHO. I like how the black background not only does its wonders for the card, but makes the label really pop. Very generous grading on this Coupon! Feedback welcome.

Chad,
Can you rotate the Johnson image and compare it to the size of the label?

[chadeast]

Originally Posted by Casey2296

Chad,
Can you rotate the Johnson image and compare it to the size of the label?

To be honest, I'm not confident enough in the scaling to make that comparison. It was done by hand and is not exact by any means. This is just meant to give an idea of what it could look like. I think that it's fair to say that the label and a T206 would be pretty close in overall surface area.

EDIT: OK, when I figured out that the flip is almost exactly the width of the 1957 Topps, or 2.5 inches, I created a better scale. The T213 in images above is undersized. It should be a little larger. I'll try to fix those. This image should be accurate.

EDIT2: The original images in my post above with the T213 WaJo have been corrected. The card was a bit too small in all holders, but esp. the current CSG holder (as can be seen in Phil's reply). The scale should be very close to true now.

[Pre War Starter]

Curious to other PreWar guys.
Do we REALLY need the qualifiers?

[Frank A]

Originally Posted by Pre War Starter

Curious to other PreWar guys.
Do we REALLY need the qualifiers?

I have never seen the need for Qualifiers on any card. The final grade is what it is. I couldn't care less about edge numbers, corner numbers or anything else.

[perezfan]

Originally Posted by Frank A

I have never seen the need for Qualifiers on any card. The final grade is what it is. I couldn't care less about edge numbers, corner numbers or anything else.

The qualifiers are an option, for which the submitter will pay a nominal fee. For vintage, I agree there is no need. If/when I submit, I will not request the qualifiers. But I believe many of the modern card collectors may opt for it.

I hope CSG is indeed reading this and can respond to some of the Forum's basic concerns. As the "new kid on the block", you'd think/hope they would be extra-responsive to consumer inquiries. If people get the sense that GSC cares (and is responsive), it would give them an immediate leg up on their current competition.

I agree that the smaller square slab for Tobacco/Caramel cards may not be feasible or cost effective. But hopefully (especially as a new advertiser here) they can at least provide a response to concerns over the flip size and color, as it pertains to smaller-sized cards that are 100+ years old.

There is just no way that the flip size should be comparable to the cards themselves!

[Casey2296]

Originally Posted by Pre War Starter

Curious to other PreWar guys.
Do we REALLY need the qualifiers?

The only qualifiers I would need are trimmed, colored, or altered.

[steve B]

Looking at that, I'm thinking that for T cards a holder that had the label on the side would be pretty nice. It could probably be made so it would easily fit existing storage boxes.

Sort of like this

Originally Posted by chadeast

To be honest, I'm not confident enough in the scaling to make that comparison. It was done by hand and is not exact by any means. This is just meant to give an idea of what it could look like. I think that it's fair to say that the label and a T206 would be pretty close in overall surface area.

EDIT: OK, when I figured out that the flip is almost exactly the width of the 1957 Topps, or 2.5 inches, I created a better scale. The T213 in images above is undersized. It should be a little larger. I'll try to fix those. This image should be accurate.

EDIT2: The original images in my post above with the T213 WaJo have been corrected. The card was a bit too small in all holders, but esp. the current CSG holder (as can be seen in Phil's reply). The scale should be very close to true now.

[Jcosta19]

Originally Posted by steve B

Looking at that, I'm thinking that for T cards a holder that had the label on the side would be pretty nice. It could probably be made so it would easily fit existing storage boxes.



Sort of like this

I was thinking the exact same thing.

Sent from my SM-G960U using Tapatalk

[RayBShotz]

So Leon, what is your interpretation of how CSG will actually slab a T206 card for instance?
Custom fit slab, slabbed with a baggie, slabbed with a gasketed insert?
Sounds like you might have had more correspondence than most of us.
Curiously interested now.

By the way, I like the shorter slab interpretation without the insert, but not the square one.
Question I would still have is how will they center or stabilize the card in the center of the holder?
RayB

[Casey2296]

-------.