All I see is TRIM!!!!!!!

[Bigdaddy]

Fred, its simple. If you have a random assortment of cards in a stack, the oversized cards will get the most wear and protect the undersized cards from having their razor sharp corners worn down.

Now doesn't that explain everything??

Originally Posted by Fred

Anybody want to bet that the ratio of the following is very lopsided?

High graded (razor sharp corners) that are "undersized"

VS

High graded (razor sharp corners) that are "oversized"


I continue to read posters saying that card sizes vary. I get that, but why is it that TPGs have probably graded MORE undersized cards with razor sharp corners than oversized cards?

Are we to believe that if card sizes do vary, that most of the cards will be "undersized" than "oversized"? Why is it that there are more "undersized" cards than "oversized" cards if we are to believe that cards vary in size?

Take a stack of just about ANY year card from the 50s going forward (heck, I'd even go back to Playballs or earlier) and I bet MOST will all be about the same size (within 1/32" or tighter).

How many different size holders does PSA have for Topps cards 1957 and later? I'm going to guess there's probably a basic standard holder for those cards and if you look at many of the cards with razor sharp corners, there's a bit more room between the plastic indents that hold the card in place.