|
|
|
|
#1
|
|||
|
|||
|
All my Topps sets from 1970 to 1979 that I have are loose. My only pet peeve is diamond cuts or those cards that are tilted.
I think I bought about 5 1976 George Brett and at least four 1972 Nolan Ryan, because after I looked at it more carefully at home after I bought them it had those tilts. haha. I don't mind top to bottom and side to side off center if they are no more than 70/30 too much on my loose cards. I had same issue while completing my 1973 Topps Football set too. Too many weird cuts and tilts. Ricky Y |
|
#2
|
||||
|
||||
|
I've almost finished that set (18 cards to go) and I swear that Topps farmed the cutting of those sheets out to some random 3rd grade art class.
__________________
Working Sets: Baseball- T206 SLers - Virginia League (-1) 1952 Topps - low numbers (-1) 1953 Topps (-54) 1954 Bowman (-2) 1964 Topps Giants auto'd (-2) |
|
#3
|
|||
|
|||
|
Once upon a time, I feel like I had some high standards and drew a firm line on what I would and wouldn't accept.
Then I found that sometimes you have to take whatever you can get, particularly when it comes to issues with lots of condition problems and relatively few that have survived. While I still tend to tightly clutch my condition pearls overall, when it comes to issues like complete Jello boxes, complete Bazooka boxes, or Venezuelan issues, among others, I've learned to be a lot less picky, especially if there's only 1 or 2 that have surfaced. Here's a great example.
__________________
Trying to wrap up my master mays set, with just one (!!!) left: 1968 American Oil left side Last edited by raulus; 09-19-2025 at 03:55 PM. |
|
#4
|
|||
|
|||
|
With some of the '60's and & '70's cards more panels or cards were cut from packaging. For 1971 Milk Duds, I prefer complete boxes. However for most of the other food issues i.e. the Jello issues, I am ok with just panels.
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Print Flaws... It's Not Just About the $$$ | Pat R | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 13 | 12-30-2023 09:36 AM |
| 1968 Topps printing flaws question? | George Baseball | Postwar Baseball Cards Forum (Pre-1980) | 4 | 07-01-2021 07:16 PM |
| 70’s Set Collectors, which “flaws” are acceptable/unacceptable to you? | Vintagevault13 | Postwar Baseball Cards Forum (Pre-1980) | 1 | 04-02-2019 09:05 PM |
| What card flaws are acceptable for your PC? | Vintagevault13 | Postwar Baseball Cards Forum (Pre-1980) | 21 | 11-25-2013 07:02 PM |
| What flaws do you spot on this Ruth? | Archive | Net54baseball Vintage (WWII & Older) Baseball Cards & New Member Introductions | 86 | 04-23-2008 08:58 PM |